Structural Defects in Silica during High Intensity Grinding Process

Main Article Content

Samayamutthirian, Palaniandy
Khairun Azizi Mohd Azizl

Abstract

Ultra fine particles (below 5µm) is accomplished via comminution. However during high intensity grinding process the structure of the ground material will be distorted and this brings qualitative changes in the nature of the fine particles. Structural changes are clearly evident in fine particles during fine grinding where the energy delivered by the mill is applied to bending or breaking of the crystal, which leads to structural alteration, by loss of regularity in the crystalline network. The degree of crystallinaty was characterised based on the XRD measurement. The presence of defects or random disorder was evident by the loss or reduction of peak intensity along the diffractograms with the broadening effect at the base of the peak. The percentage of crystallinity decreased from 100% before grinding to 35.44% after 600s of grinding. The d₅₀ value also plays an important role to the degree of crystallinity. When the particle size was 1.15µm, the degree of crystallinity was around 35.44%.

Downloads

Download data is not yet available.

Article Details

How to Cite
Palaniandy, S., & Azizi Mohd Azizl, K. (2002). Structural Defects in Silica during High Intensity Grinding Process. Malaysian Journal of Science, 21, 147–150. Retrieved from https://malindojournal.um.edu.my/index.php/MJS/article/view/8878
Section
Original Articles